Lazer Z E-Series

Exmark LZE651GKA484A2

Features

Hydro Drive, Simplified
Unibody Frame
Less Time At The Pump
On-Board Diagnostics

Quick Specs

Type: Riding Mowers
Width: 59.6"
Height: 70.5"
Depth: 79.2"

See More

QTY

URL

Hydro Drive, Simplified

Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Unibody Frame

Our one-piece body frame is a classic case of less is more. Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z s unibody frame is actually a case of less is way more.

Less Time At The Pump

Gas-powered E-Series models have a single 8-gallon tank with one fill location.

On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Rear Discharge Deck

Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

Hydro Drive, Simplified Our hydro drive system has no hoses to leak and just one easy-to-change belt. Only simple, annual maintenance is required. It also lowers the center of gravity for improved handling.

Unibody Frame Our one-piece body frame is a classic case of less is more. Because, fewer parts equal more strength. And, more durability. So, in the interest of accuracy, the Lazer Z s unibody frame is actually a case of less is way more.

Less Time At The Pump Gas-powered E-Series models have a single 8-gallon tank with one fill location.

On-Board Diagnostics Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

Fewer Grease Points With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

Ultracut Series 4 Deck This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

Rear Discharge Deck Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.

Tool-less Belt Removal Deck and hydro belt can be installed without using any tools.

Features

Hydro Drive, Simplified
Unibody Frame
Less Time At The Pump
On-Board Diagnostics
Fewer Grease Points
Ultracut Series 4 Deck
Rear Discharge Deck
Tool-less Belt Removal

Equipment
UPC	193308000442
Starter	Electric
Steering Control	Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Caster Forks	.50" thick caster yoke arms.
Front Caster Tires	13 x 5.0-6, smooth-tread, semi-pneumatic.
Drive Tires	23 x 9.50-12, 4 ply Super Turf®
Parking Brake	Lever-actuated disc brake.
Tractor Frame	Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Blade Spindles	No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
Electrical	12-volt battery with 15-amp alternator.
Standard Features	Engine hour meter and cup holder
Seat	Deluxe, bolstered suspension seat with Elastomeric Vibration Control material. Adjustment: Fore and aft from Operators Position.
Power Components
Transmission Speeds	Infinitely Variable
Engine Brand	Kawasaki®
Engine Brand	Kawasaki
Engine Model	FX651V
Engine Displacement	726
Transmission	Hydrostatic
Engine Series	V-Twin
Speed	Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.1 kmph) reverse.
Drive	Hydro-Drive
Engine Spec	FX651V-FS07-R
Engine Speed	3,750 RPM
Air Filter	Heavy-duty canister air filtration system
Fuel Capacity	12-gallon (45.4-L), single fuel tank with single fill location.
Drive Description	Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Fuel Type	Gas Carbureted
PTO Engagement	MagStop Electromagnetic 175 ft-lb clutch with spot brake
Drive Wheel Release	Allows unit movement without engine running.
Fuel Indicator	Yes - electronic Sender
Deck Lift	Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Carb Compliant	No
Safety Package	Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
ROPS	2-post foldable ROPS standard with seat belt and latch.
Decks
Deck Style	Floating Deck
Deck Style Description	Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width / Cutting Deck	48"
Deck Construction	10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
Cutting Heights	1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator s seat.
Blade Tip Speed	Approximately 18,500 fpm.
Blades	3 Blades at 16.25" Length
Dimensions
Width	59.6 in. (151.4 cm)
Height	70.5 in. (179.1 cm)
Length	79.2 in. (201.2 cm)
Curb Weight	1118

Quick Specs

Appearance
Type: Riding Mowers
Dimensions
Width: 59.6"
Height: 70.5"
Depth: 79.2"

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Lawn equipment can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new lawn equipment should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.